高陡度非球面磨削亚表面损伤深度规律

具有高陡度非球面特性的光学元件可以明显改善光学系统的空气动力学性能,从而提升和优化系统综合性能。磨削加工方法可以作为此类元件的前期加工工序,而磨削难免会造成零件的亚表面损伤,且在这种高陡度非球面磨削加工中磨削参数是实时变化的,造成整个工件亚表面损伤深度不一致。针对这种情况,建立亚表面损伤预测模型,并结合半球形砂轮磨削的特点,通过理论计算预测非球面磨削亚表面损伤深度分布规律。在此基础上,以热压多晶氟化镁平面为对象进行模拟参数实验,通过磁流变抛斑点法得到各组参数下亚表面损伤深度情况,结果显示损伤深度范围在12.79μm~20.96μm之间,且沿试件半径方向由内向外呈增大趋势,结果与预测模型相吻合。     

The Production and Deposition of the Guisborough Helmet

In September 1878 the British Museum received a donation of a folded metal plate which had been embossed and gilded. Restoration of the object revealed that the folded plate was in fact the outer casing of a Roman copper alloy cavalry sports type helmet which dates to the late second or third century AD. The story of what became known as the Guisborough helmet began 14 years earlier in what was then the North Riding of Yorkshire when workers employed by the Cleveland Railway Company discovered a ‘very curious plate of metal’ during road construction. It appears that the helmet was deliberately prepared for deposition and buried at a depth of c30 cm close to a stream. Examination by the authors suggests that this was a high value item that had been repaired many times. Experimental evidence suggests that the decoration alone required approximately 16 h to fashion.     

COSMIC 掩星反演的水汽廓线质量分析

利用2006—2012年北半球冬季低纬度地区(30°S~30°N)无线电探空站数据及全球大气成分和气候监测再分析数据对1000 h Pa~200 h Pa高度层的气象、电离层与气候星座观测系统全球定位系统掩星反演的比湿廓线进行了精度和可靠性验证。结果表明,水汽对气象、电离层与气候星座观测系统掩星反演影响较大,尤其在中、低对流层及热带地区等水汽含量比较大的地区,且气象、电离层与气候星座观测系统掩星数据在850 hpa以下可能并不太适用于评估其他数据。     

From Nationalism to Factionalism: Faultlines in the Naga Insurgency

Do ceasefires or peace talks create fragmentation in the insurgent groups? Rather than proposing claims that can offer predictions about armed groups behaviour under ceasefires or peace processes, the analysts tend to focus largely on the dynamics between state and non-state actor. The experts pay little attention to overtime changes in social and local political context which might contribute to propelling a rebel group towards fragmentation and factionalism. The present study intends to fill this gap by exploring the shifting role of public opinion and ethnic support for the peace talks to ascertain whether it can increase the likelihood of factionalism in rebel groups or not. This article applies this approach to the case of Naga National Movement (1947–2015) in India, and finds that the proposed variable appears to have increased the frequency of factionalism in the movement.     

科学管理、精益管理与精确作战工程保障研究

设计是作战行动筹划的重要步骤,精确工程保障需要对工程保障行动进行精密的设计和精确管理与控制。科学管理采用科学实验的方法,通过劳动方法标准化和差别计件工资制度,有效提高了工作效率,其基本原理经过百余年的实际检验,被证明是一个成熟有效的管理方法。借鉴科学管理理论,需要对工程保障行动进行动作研究,进而研究工程保障行动的作业标准,以期提高其保障效率。精益管理是在科学管理在新的历史时期的发展与改进,它使用了准时制、零库存、均衡生产、持续改进等先进的管理理念和六西格玛管理、成组技术等先进技术,为基于信息系统体系作战的工程保障能力生成提供了有益的借鉴,可加深我们对精确工程保障的理解,促进精确工程保障研究的可操作性。     

Influence of Al2O3 particles on the microstructure and mechanical properties of copper surface composites fabricated by friction stir processing

The influence of three factors, such as volume percentage of reinforcement particles (i.e. Al₂O₃), tool tilt angle and concave angle of shoulder, on the mechanical properties of Cu–Al₂O₃ surface composites fabricated via friction stir processing was studied. Taguchi method was used to optimize these factors for maximizing the mechanical properties of surface composites. The fabricated surface composites were examined by optical microscope for dispersion of reinforcement particles. It was found that Al₂O₃ particles are uniformly dispersed in the stir zone. The tensile properties of the surface composites increased with the increase in the volume percentage of the Al₂O₃ reinforcement particles. This is due to the addition of the reinforcement particles which increases the temperature of recrystallization by pinning the grain boundaries of the copper matrix and blocking the movement of the dislocations. The observed mechanical properties are correlated with microstructure and fracture features.     

定时拦截在轨拦截器机动轨道设计与优化

在满足对目标卫星在指定时间进行拦截的要求下,考虑拦截器变轨能量消耗最省,提出了基于定时拦截的在轨机动拦截轨道选择与优化方法。该方法能够迅速设计和优化出最优在轨机动拦截轨道、变轨点位置和变轨所需的能量。仿真结果表明,模型准确、有效,能够满足作战要求。     

Initiating insurgencies abroad: French plans to ‘chouannise’ Britain and Ireland, 1793–1798

Secret French plans to launch guerrilla-style raids on the British Isles devised in the spring of 1796 were referred to as ‘chouanneries’. The name and concept behind these small-war operations were modelled on the irregular tactics used by the Chouan rebels in the Vendée, which the French state army had brutally quashed, but some wished to transfer into their institutional practice. Part of France's ongoing military strategy in the war against Britain, which included fomenting insurrection in Ireland, these irregular operations were to be manned partially by pardoned deserters and released convicts and prisoners of war. Of these, only Tate's brief invasion of Wales in 1797 was realised, but the surviving plans provide insightful historical lessons into an Anglophobic mindset shared by a small network of practitioners and policy deciders on the effectiveness of such shock and awe tactics. Largely motivated by the desire to take revenge for Britain's support of counter-revolutionaries in the Vendée, these plans could more aptly be referred to as counter-‘chouanneries’.     

非相干背景光辐照二波耦合中的最佳匹配随机共振

针对非相干背景光辐照二波耦合中参数的最佳匹配设计问题,提出了一种基于随机共振理论的研究方法。首先,文章通过二波耦合过程进行物理机理分析和数值实验分析,证明了该问题在本质上可归结为一种随机共振现象。其次,从随机共振的角度,研究其中的最佳参数设计问题,给出了一种分布处理的最优参数设计流程。按照该方法,在给定增益要求的情况下,先根据信号光饱和与否来确定晶体长度,最后根据非相干光的比例对增益的影响来确定非相干光的比例。仿真实验表明,经过最佳参数设计后,信号的增益和输出信噪比上均有显著提高。     

Assessing the value of demand sharing in supply chains

We consider the problem of assessing the value of demand sharing in a multistage supply chain in which the retailer observes stationary autoregressive moving average demand with Gaussian white noise (shocks). Similar to previous research, we assume each supply chain player constructs its best linear forecast of the leadtime demand and uses it to determine the order quantity via a periodic review myopic order‐up‐to policy. We demonstrate how a typical supply chain player can determine the extent of its available information in the presence of demand sharing by studying the properties of the moving average polynomials of adjacent supply chain players. The retailer's demand is driven by the random shocks appearing in the autoregressive moving average representation for its demand. Under the assumptions we will make in this article, to the retailer, knowing the shock information is equivalent to knowing the demand process (assuming that the model parameters are also known). Thus (in the event of sharing) the retailer's demand sequence and shock sequence would contain the same information to the retailer's supplier. We will show that, once we consider the dynamics of demand propagation further up the chain, it may be that a player's demand and shock sequences will contain different levels of information for an upstream player. Hence, we study how a player can determine its available information under demand sharing, and use this information to forecast leadtime demand. We characterize the value of demand sharing for a typical supply chain player. Furthermore, we show conditions under which (i) it is equivalent to no sharing, (ii) it is equivalent to full information shock sharing, and (iii) it is intermediate in value to the two previously described arrangements. Although it follows from existing literature that demand sharing is equivalent to full information shock sharing between a retailer and supplier, we demonstrate and characterize when this result does not generalize to upstream supply chain players. We then show that demand propagates through a supply chain where any player may share nothing, its demand, or its full information shocks (FIS) with an adjacent upstream player as quasi‐ARMA in—quasi‐ARMA out. We also provide a convenient form for the propagation of demand in a supply chain that will lend itself to future research applications. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 515–531, 2014